FEATURES:
- 4 Stage Arctic Compressor Block featuring:
- Air-cooled with a High Velocity, 10 Bladed Fan
- Relief Valves on All Stages
- Aluminium Inter Coolers
- Stainless Steel After Cooler
- Interstage and Final Moisture Separators
- Aluminum Crankcase
- Forged Steel Crankshaft
- Cast Iron Cylinders
- Fully Enclosed Sound Dampened Cabinet
- Lift Off Panel Hinges
- Liquid Filled Interstage Pressure Gauges
- Moisture/Carbon Monoxide Visual Indicator
- Double Rubber Vibration Isolation
- Automatic Condensate Drain System
- Pressure Switch
- Hour Meter
- Single or Three Phase Electric Motor
- Emergency Stop Push Button
PURIFICATION:
- 24,000 Cu. Ft. at 80 degrees Fahrenheit filtration system designed to provide C.G.A. Grade “E” breathing air.
- System uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1500 standard)
- Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air.
OPTIONAL FEATURES:
- Real Time Electronic CO Monitor
- Additional Filtration Capacity
- Low Oil Level Shutdown
ELECTRICAL REQUIREMENTS:
The compressor requires a minimum 40 Amp, 230 Volt connection for single-phase operation, and 30 AMP, 230 or 208 Volt connection for three-phase operation-
Model
PSI
CFM
HP
Stages
RPM
Weight
E4-7.5-A6
6000
9
7.5
4
1100
680 lbs.
E4-10-A6
6000
14
10
4
1400
700 lbs.
FEATURES:
- 3 Stage Arctic Compressor Block featuring:
- Air Cooled with a High Velocity, 10 Bladed Fan
- Relief Valves on All Stages
- Aluminium Inter Coolers
- Stainless Steel After Cooler
- Interstage and Final Moisture Separators
- Aluminum Crankcase
- Forged Steel Crankshaft
- Cast Iron Cylinders
- Fully Enclosed Sound Dampened Cabinet
- Lift Off Panel Hinges
- Liquid Filled Interstage Pressure Gauges
- Moisture/Carbon Monoxide Visual Indicator
- Double Rubber Vibration Isolation
- Automatic Condensate Drain System
- Pressure Switch
- Hour Meter
- Single or Three Phase Electric Motor
- Emergency Stop Push Button
PURIFICATION:
- 24,000 Cu. Ft. at 80 degrees Fahrenheit filtration system designed to provide C.G.A. Grade “E” breathing air.
- System uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1500 standard)
- Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air.
OPTIONAL FEATURES:
- Real Time Electronic CO Monitor
- Additional Filtration Capacity
- Low Oil Level Shutdown
ELECTRICAL REQUIREMENTS:
The compressor requires a minimum 40 Amp, 230 Volt connection for single-phase operation, and 30 AMP, 230 or 208 Volt connection for three-phase operation-
Model
PSI
CFM
HP
Stages
RPM
Weight
E3-5-A
5000
6.5
5
3
1100
600 lbs.
E3-7.5-A
5000
9
7.5
3
1500
610 lbs.
E3-5-A6
6000
5.5
5
3
1100
600 lbs.
E3-7.5-A6
6000
8
7.5
3
1500
610 lbs.
FEATURES:
- Air cooled, 3 stage Arctic Block
- Relief valves on all stages
- Aluminium inter coolers
- Stainless steel after cooler
- High velocity, 10 bladed fan
- Liquid filled final pressure guage
- Rubber vibration isolation
OPTIONS:
- Magnetic starter with stop/start switch
- Hour meter
- Automatic drain system
- Automatic high pressure shut down
- 16,000 Cu. Ft. filtration capacity
- 24,000 Cu. Ft. filtration capacity
- 460v 3-phase
PURIFICATION:
9,800 Cu. Ft. at 80 degrees fahrenheit filtration system designed to provide C.G.A. grade “E” air. The system uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1 500 standard) Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air. Additional filtration capacity can be added for high volume usersELECTRICAL REQUIREMENTS:
The compressor requires a minimum 40 Amp, 230 Volt connection for single-phase operation, and 30 AMP, 230 or 208 Volt connection for three-phase operation
Model |
PSI |
CFM |
HP |
Stages |
RPM |
Power Supply |
Weight |
O3-5-A |
5000 |
6.5 |
5 |
3 |
1100 |
Single or 3-Phase |
320 lbs. |
O3-7.5-A |
5000 |
9 |
7.5 |
3 |
1500 |
Single or 3-Phase |
320 lbs. |
O3-5-A6 |
6000 |
5.5 |
5 |
3 |
1100 |
Single or 3-Phase |
320 lbs. |
O3-7.5-A6 |
6000 |
8 |
7.5 |
3 |
1500 |
Single or 3-Phase |
320 lbs. |
- Radial 4 Stage Arctic Compressor Block featuring:
- Air-cooled with a high-velocity, 12-bladed fan
- Relief valve on all stages
- Aluminum intercoolers
- Stainless steel after cooler
- Inter-stage and final moisture separators
- Aluminum crankcase
- Steel crankshaft
- Cast iron cylinders
- 7.75 quart oil capacity
- Fully enclosed sound-dampened cabinet
- Lift off panel hinges
- Liquid filled inter-stage pressure gauges
- Moisture/Carbon Monoxide visual indicator
- Pressurized lubrication system
- Liquid filled oil pressure gauge
- Low oil pressure shut down
- Double rubber vibration isolation
- Automatic condensate drain system
- Pressure switch
- Hour meter
- Three phase electric motor
- Liquid filled filter pressure gauge
- 57,000 Cu. Ft. at 80° Fahrenheit filtration system designed to provide C.G.A. Grade ”E” breathing air
- The system uses a dryer bed to remove water indicator in excess of dew point -65° (NFPA Pressurized lucubration system 1500 standard)
- Activated charcoal and a carbon monoxide catalyst remove the remaining contaminants to provide CGA Grade ”E” breathing air
- Real time electronic CO monitor
- Additional filtration capacity
Our air compressor blocks are compact and designed with high-velocity composite fans and aluminum inter-coolers to provide the necessary cooling to keep your compressor running in most operating environments. The 3 stage compressors and 4 stage compressors can supply air applications from 2000 PSI to 6000 PSI.
Choose Arctic Compressor because we have specialized in providing quality breathing air systems in the paintball, fire and industrial markets for over 30 years. Our systems are built with the customer in mind and as such are affordable, inexpensive to maintain and repair, and are long-lasting. Through our network of distributors, we can help you find the right high pressure compressor for your needs.
Contact us to find the right breathing air compression system for your team.